Removing an old fence in Lisle creates more waste than most homeowners expect.
You may have:
Long wood panels and rails
Pressure-treated posts
Chain-link or metal sections
Concrete post footings
Screws, brackets, hinges, and sharp hardware
Soil attached to the posts
A few trips to the transfer station can quickly become a full weekend project. A bin rental keeps the debris on-site while you work. Tor Bin Rental delivers driveway-safe bins throughout Lisle and surrounding communities, including Alliston, Everett, and Angus.
This guide explains how to dismantle your fence, separate the materials, estimate the right bin size, protect your driveway, and schedule pickup.
Before You Remove the Fence
Start with a quick site and safety check.
1. Arrange a utility locate
Before digging around fence posts, request a utility locate. Underground gas, electrical, water, or communication lines may run near the fence line.
Do not assume an old fence was installed away from utilities.
2. Wear basic protective equipment
Fence removal involves sharp edges, nails, splintered wood, and heavy concrete.
Use:
Work gloves
Safety glasses
Sturdy work boots
Long sleeves and work pants
Hearing protection when cutting metal or concrete
Work in manageable sections. Do not pull several connected panels at once if they could fall or swing into someone.
3. Plan the bin location first
Choose a placement area before demolition begins. The bin should be close enough for easy loading but not block:
Garage access
Sidewalks
Driveway entrances
Fire routes
Utility access
Neighbouring properties
Tor Bin Rental’s driveway-safe bins are designed to protect asphalt, concrete, interlock, and other property surfaces. You still need to provide a clear delivery path and a stable placement area.
How to Dismantle an Old Fence
Follow a controlled sequence instead of pulling everything down at once.
Step 1: Remove gates and hardware
Take off gates first. Remove hinges, latches, brackets, and visible screws.
Place small hardware in a pail or box. Loose nails and screws are easy to miss and can create a safety hazard during loading.
Step 2: Take down panels or boards
For a wood privacy fence:
Remove the top rails or trim.
Separate the panels from the posts.
Cut long sections into manageable pieces if required.
Stack the wood flat or bundle it safely.
For chain-link fencing:
Remove the tension wire.
Unfasten the mesh from the posts.
Roll the chain-link tightly.
Remove rails and fittings.
Keep metal posts separate.
Step 3: Remove the posts and footings
Posts set in concrete are usually the heaviest part of the project.
Expose the concrete footing carefully. You may need to dig around it, rock it loose, or use suitable lifting equipment. Avoid sudden movements. A concrete footing can be heavier than it looks.
If you cannot remove the posts safely, hire a professional for that portion of the work. A bin rental handles disposal. It does not replace safe demolition practices.
Separate Wood, Metal, and Concrete
Sorting your materials makes disposal more efficient and helps you choose the correct bin.
Wood
Place these materials together:
Fence boards
Rails
Wood panels
Wooden gates
Untreated offcuts
Keep pressure-treated, painted, or heavily contaminated wood separate from clean untreated wood where possible. Do not burn treated fence boards.
Break down long pieces so they sit safely below the top rim of the bin.
Metal
Set aside:
Chain-link mesh
Metal posts
Rails
Hinges
Brackets
Latches
Screws and fasteners
Remove wood, plastic caps, and other non-metal attachments before taking recyclable metal to a scrap facility.
Concrete
Concrete post footings are heavy and can reach a bin’s weight limit before the container looks full.
Separate:
Concrete chunks
Footing pieces
Clean masonry
Soil attached to the footings
If a metal post is still embedded in the concrete, separate the metal before using a specialty clean-fill bin. Tor Bin Rental’s 8-yard bin is for soil, concrete, and asphalt only. It is not for household waste, wood, mixed construction debris, or materials containing rebar.
If you are placing mixed fence-removal debris in a household and construction waste bin, contact Tor Bin Rental first to confirm the material combination.

Estimate Your Fence-Removal Waste
Measure the fence before booking. You need three details:
Total fence length
Fence type
Whether concrete footings are included
Solid wood privacy fencing creates more volume than chain-link fencing. Concrete creates less visual volume but adds significant weight.
These planning estimates can help:
These are estimates, not guarantees. Old fences with closely spaced posts, double-sided boards, large gates, or substantial concrete footings may produce more waste.
Use this if/then guide
If you are removing a short section of wood or chain-link fence, then a 10-yard bin may be enough.
If you are removing approximately 100–150 feet of solid wood fencing, then consider a 14-yard bin.
If you are removing several fence lines, large gates, sheds, or other bulky debris at the same time, then choose a 20-yard bin.
If your main material is clean concrete footings, soil, or asphalt, then ask about the specialty 8-yard bin.
If the load includes wood, metal, household items, and mixed construction waste, then use a 10-, 14-, or 20-yard household and construction waste bin.
Do not load above the top rim. Overfilled bins cannot be safely transported.
July 2026 Bin Rental Pricing for Lisle
The following are July 2026 starting rates. Your final price can vary by postal code and is subject to H.S.T.
10-yard bin
Dimensions:7' wide × 11' long × 3.5' high
Regular Rate: Starts at $325
All-In Rate: Starts at $395
Best for smaller fence removals and mixed household or construction waste
14-yard bin
Dimensions:8' wide × 14' long × 3.5' high
Regular Rate: Starts at $325
All-In Rate: Starts at $460
Best for longer wood fences, larger gates, and moderate amounts of mixed debris
20-yard bin
Dimensions:8' wide × 14' long × 5' high
Regular Rate: Starts at $350
All-In Rate: Starts at $590
Best for multiple fence lines, bulky demolition debris, or a fence removal combined with a yard cleanup
8-yard specialty bin
Dimensions:7' wide × 14' long × 2' high
Designed only for soil, concrete, and asphalt
Not suitable for household waste, wood, metal, or mixed construction waste
The Regular Rate includes:
7-day rental
Delivery
Pickup
Up to 1 metric tonne
Additional weight is charged at $130 per metric tonne. A 5% fuel surcharge applies.
The All-In Rate provides a more predictable disposal cost for eligible loads and includes unlimited disposal under the applicable material and load requirements. Review the details on the Services & Pricing page before booking.

Protect Your Lisle Driveway During Delivery
Driveway damage is a common concern when renting a bin. Tor Bin Rental uses driveway-safe bins designed to reduce contact and protect asphalt, concrete, and interlock.
You can also make delivery easier by:
Clearing vehicles from the driveway
Removing low branches where possible
Keeping toys, tools, and outdoor furniture out of the delivery path
Moving snow, ice, or loose gravel
Identifying overhead wires and tight turns
Telling us about gates, slopes, narrow access, or soft ground
Take a photo of the intended placement area before booking. It can help confirm whether the location will work.
Review the FAQ for answers about driveway placement, truck access, weight limits, and rental terms.
Book Before Demo Day
Fence removal usually creates waste immediately. Do not wait until the fence is already dismantled to arrange disposal.
Book one to two days before demolition when possible. Tor Bin Rental offers same-day or next-day delivery in many areas, but availability can change during busy renovation and cleanup periods.
The process is simple:
Book: Choose your bin, rental term, and delivery location online.
Deliver: We place the driveway-safe bin at the agreed location.
Load: Dismantle the fence and keep wood, metal, and concrete organized.
Pickup: Request pickup when the fence waste is loaded and ready.
Choose a 3-day, 7-day, or monthly rental based on your project schedule. Early pickup and extensions are also available.
If you are unsure whether a 10-yard, 14-yard, or 20-yard bin fits your fence project, compare the options in our 14-yard vs. 20-yard bin size guide.
Final Fence-Removal Checklist
Before booking:
✅ Measure the fence length
✅ Identify wood, metal, and concrete
✅ Arrange a utility locate before digging
✅ Estimate whether footings are included
✅ Choose a clear, stable driveway placement area
✅ Keep the load below the top rim
✅ Confirm any unusual materials before delivery
✅ Book pickup after the final debris is loaded
Ready to clear your old fence in Lisle?
➡️ Book your bin online 24/7 or contact Tor Bin Rental at 705-481-7604.
You can also email info@torbinrental.ca with your fence length, material type, and preferred delivery date. We will help you choose a practical bin for the job.

